Taihua Mini power RelayT73 JQC-3F HF3FF LS-T7310A 7A 4 Pin 5 Pin
·E tšepahalang haholo, theko e tlase
·Saese e nyane le matla a switjha a maholo ho fihla ho 10A
· Mofuta o phahameng oa matla a dielectric · Tiisitsoe ka ho Feletseng
| Tokisetso ea ho Kopana | 1H, 1D, 1Z |
| Ikopanye le Resistance | ≤ 100mΩ (1A 24VDC) |
| Boitsebiso ba ho Kopana | Alloy ea silevera |
| Lintlha tsa Mabitso (Ha li Hanyetse) | 5A 28VDC; 10A 250VAC |
| Max.Ho fetola Voltage | 277VAC/28VDC |
| Max.Ho Fetola Hona Joale | 10A |
| Max.Ho Fetola Matla | 2770VA/140W |
| Bophelo ba Mechini | 1 × 10 7 ts'ebetso |
| Bophelo ba Motlakase | 1 × 105 ts'ebetso |
| Khanyetso ea Insulation | 1000MΩ (ho 500VDC) | |
| Dielectric Matla | Pakeng tsa coil le mabitso | 1500VAC 1min |
| Pakeng tsa mabitso a bulehileng | 1 mets | |
| Nako ea ho sebetsa (ho nomi. volt.) | ≤8ms | |
| Nako ea ho lokolloa (ho nomi. volt.) | ≤5ms | |
| Mongobo | 45% ~ 85% RH | |
| Boemo ba polokelo | -55°C ~ +85°C | |
| Boemo ba ho sebetsa | -55°C~+70°C | |
| Sehlopha sa UL F | Sehlopha sa F | |
| Ho hanyetsana le Tšabo | E sebetsang | 98m/s2 |
| E senyang | 980m/s2 | |
| Khanyetso ea ho thothomela | 10Hz ho 55Hz 1.5mm DA | |
| Boima ba yuniti | Hoo e ka bang.12g | |
| Kaho | Mofuta o Tiisitsoeng, Mofuta oa Sekoaelo sa Lerōle, Mofuta oa Flux Tight | |
Lintlha: 1) Lintlha tse bontšitsoeng ka holimo ke litekanyetso tsa pele.
2) Ka kopo fumana mocheso oa mocheso oa coil ka sebopeho se kobehileng ka tlase.
Letlapa lena ke la litšupiso tsa bareki.Litlhaloso tsohle li ka fetoha ntle le tsebiso.
360mW
| Lebitso VDC | Nka Palo ea li-volts (Bok.) VDC | O tlohetse Palo ea li-volts (Mits.) VDC | *Boholo. E lumelletsoe VDC | Koele Khanyetso Ω±10% |
| 3 | 2.25 | 0.3 | 3.9 | 25 |
| 5 | 3.75 | 0.5 | 6.5 | 70 |
| 6 | 4.50 | 0.6 | 7.8 | 100 |
| 9 | 6.75 | 0.9 | 1 1.7 | 220 |
| 12 | 9.00 | 1.2 | 15.6 | 400 |
| 18 | 13.5 | 1.8 | 23.4 | 900 |
| 24 | 18.0 | 2.4 | 31.2 | 1600 |
| 48 | 36.0 | 4.8 | 62.4 | 6400 |
Hlokomela:
"*Max Allowable Voltage" : Coil ea relay e ka mamella matla a maholo a lumellehang ka nako e khuts'oane feela.
450mW
| Lebitso VDC | Nka Palo ea li-volts (Bok.) VDC | O tlohetse Palo ea li-volts (Mits.) VDC | *Boholo. E lumelletsoe VDC | Koele Khanyetso Ω± 10% |
| 3 | 2.25 | 0.3 | 3.9 | 20 |
| 5 | 3.75 | 0.5 | 6.5 | 55 |
| 6 | 4.50 | 0.6 | 7.8 | 80 |
| 9 | 6.75 | 0.9 | 1 1.7 | 180 |
| 12 | 9.00 | 1.2 | 15.6 | 320 |
| 18 | 13.5 | 1.8 | 23.4 | 720 |
| 24 | 18.0 | 2.4 | 31.2 | 1280 |
| 48 | 36.0 | 4.8 | 62.4 | 5120 |
Lintlha:
1 .Boto ea PC e kopantsoeng ka mofuta oa sekoaelo sa lerōle le li-relay tsa mofuta oa flux tight e ke ke ea hlatsuoa kapa / kapa ea koaheloa.
2. Mofuta oa sekoaelo sa lerole le li-relay tsa mofuta oa flux tight li ke ke tsa sebelisoa tikolohong ka lerōle, kapa H
| Matla a Coil | 360mW 450mW |
Tlhaloso: 1) Haeba ho se motho ea mamellangance e bonts'itsoe ka tekanyo ea kemiso: tekanyo ea kemiso≤1mm, mamello e lokela ho ba±0.2mm;boholo ba setšoantšo＞1mm le≤5mm, mamello e lokela ho ba±0.3mm; boholo ba setšoantšo＞5mm, mamello e lokela ho ba±0.4mm.
2) Mamello ntle le ho bonts'a sebopeho sa PCB ke kamehla±0.1mm.
Sena leqephe la lintlha is bakeng sa bareki' sesupo. Tsohle the litlhaloso ba sehlooho to phetoho ntle le hlokomela.
