Taihua mofuta o mocha oa motlakase oa motlakase oa motlakase JQX-30F-N o nang le sokete
· Sebopeho se tiileng, ho tsieleha ho matla le ho hanyetsa ho sisinyeha, bophelo bo bolelele ba tšebeletso.
.Moroalo switching hona joale: 25A
· 2 kapa 3 lihlopha tsa ho instola tse ikopanye le di a fumaneha.
.E fumaneha ka mofuta oa sokete, mofuta oa welding le mofuta oa flange.
| Tokisetso ea ho Kopana | 2H, 2D, 2Z | 3H,3D,3Z |
| Ikopanye le Resistance | ≤ 100mΩ | |
| Boitsebiso ba ho Kopana | Alloy ea silevera | |
| Lintlha tsa Mabitso (Ha li Hanyetse) | 25A 28VDC; 25A 240VAC | |
| Max.Ho fetola Voltage | 240VAC / 28VDC | |
| Max.Ho Fetola Hona Joale | 25A | |
| Max.Ho Fetola Matla | 6000VA/700W | |
| Bophelo ba Mechini | 1 × 10 6 ts'ebetso | |
| Bophelo ba Motlakase | 5 × 104 ts'ebetso | |
| Khanyetso ea Insulation | 200MΩ (ho 500VDC) | |
| Dielectric Matla | Pakeng tsa coil le mabitso | 2500VAC 1min |
| Pakeng tsa mabitso a bulehileng | 1500VAC 1min | |
| Nako ea ho sebetsa (ho nomi. volt.) | ≤ 15ms | |
| Nako ea ho lokolloa (ho nomi. volt.) | ≤ 10ms | |
| Mongobo | 35% ~ 85% RH | |
| Boemo ba polokelo | -25°C~+65°C | |
| Boemo ba ho sebetsa | -25°C~+55°C | |
| Sehlopha sa UL F | Sehlopha sa F | |
| Ho hanyetsana le Tšabo | E sebetsang | 98m/s2 |
| E senyang | 980m/s2 | |
| Khanyetso ea ho thothomela | 10Hz ho 55Hz 1.5mm DA | |
| Boima ba yuniti | Hoo e ka bang.77g | |
| Kaho | Mofuta oa Sekoahelo sa Lerōle | |
Lintlha: 1) Lintlha tse bontšitsoeng ka holimo ke litekanyetso tsa pele.
2) Ka kopo fumana mocheso oa mocheso oa coil ka sebopeho se kobehileng ka tlase.
Letlapa lena ke la litšupiso tsa bareki.Litlhaloso tsohle li ka fetoha ntle le tsebiso.
| Lebitso VDC | Nka Palo ea li-volts (Bok.) VDC | O tlohetse Palo ea li-volts (Mits.) VDC | *Boholo. E lumelletsoe VDC | Koele Khanyetso Ω± 10% |
| 12 | 9.00 | 1.2 | 13.2 | 80 |
| 24 | 18.0 | 2.4 | 26.4 | 320 |
| 1 10 | 82.5 | 1 1 | 121 | 1280 |
| 220 | 165.0 | 22 | 242 | 6720 |
| Lebitso VAC | Nka Palo ea li-volts (Bok.) VAC | O tlohetse Palo ea li-volts (Mits.) VAC | *Boholo. E lumelletsoe VAC | Koele Khanyetso Ω± 10% |
| 12 | 9.60 | 3.6 | 13.2 | 20 |
| 24 | 19.2 | 7.2 | 26.4 | 80 |
| 1 10 | 88.0 | 33 | 121 | 320 |
| 220 | 176.0 | 66 | 242 | 6780 |
Hlokomela:
"*Max Allowable Voltage": Coil ea relay e ka mamella matla a maholo a lumellehang ka nako e khuts'oane feela
Lintlha:
1 .Boto ea PC e kopantsoeng ka mofuta oa sekoaelo sa lerōle le li-relay tsa mofuta oa flux tight e ke ke ea hlatsuoa kapa / kapa ea koaheloa.
2. Mofuta oa sekoaelo sa lerole le li-relay tsa mofuta oa flux tight li ke ke tsa sebelisoa tikolohong ka lerōle, kapa H
| Matla a Coil | DC: 1.8W AC: 2,5VA |
Sena leqephe la lintlha is bakeng sa bareki' sesupo. Tsohle the litlhaloso ba sehlooho to phetoho ntle le hlokomela.
|
flange mofuta |
|
Tlhokomeliso: 1) Haeba ho se na mamello e bontšitsoeng ka tekanyo ea kemiso: tekanyo ea kemiso ≤ 1mm, mamello e lokela ho ba ± 0.2mm;tekanyo ea kemiso ＞1mm le ≤5mm, mamello e lokela ho ba ± 0.3mm; tekanyo ea kemiso ＞5mm, mamello e lokela ho ba ± 0.4mm.
2) Mamello ntle le ho bonts'a sebopeho sa PCB e lula e le ± 0.1mm.
