Phetiso ea matla ea Taihua JQX-40F DC12V DC24V AC220V
·E tšepahalang haholo, theko e tlase
·Saese e nyane le matla a switjha a maholo ho fihla ho 10A
· Mofuta o phahameng oa matla a dielectric · Tiisitsoe ka ho Feletseng
| Tokisetso ea ho Kopana | 1H, 1D, 1Z |
| Ikopanye le Resistance | ≤ 100mΩ (1A 24VDC) |
| Boitsebiso ba ho Kopana | Alloy ea silevera |
| Lintlha tsa Mabitso (Ha li Hanyetse) | 40A 28VDC; 40A 250VAC |
| Max.Ho fetola Voltage | 250VAC / 28VDC |
| Max.Ho Fetola Hona Joale | 40A |
| Max.Ho Fetola Matla | 10000VA/1120W |
| Bophelo ba Mechini | 1 × 10 7 ts'ebetso |
| Bophelo ba Motlakase | 3 × 104 ts'ebetso |
| Khanyetso ea Insulation | 200MΩ (ho 500VDC) | |
| Dielectric Matla | Pakeng tsa coil le mabitso | 2500VAC 1min |
| Pakeng tsa mabitso a bulehileng | 1500VAC 1min | |
| Nako ea ho sebetsa (ho nomi. volt.) | ≤25ms | |
| Nako ea ho lokolloa (ho nomi. volt.) | ≤ 15ms | |
| Mongobo | 45% ~ 85% RH | |
| Boemo ba polokelo | -55°C~+85°C | |
| Boemo ba ho sebetsa | -55°C~+70°C | |
| Sehlopha sa UL F | Sehlopha sa F | |
| Ho hanyetsana le Tšabo | E sebetsang | 98m/s2 |
| E senyang | 980m/s2 | |
| Khanyetso ea ho thothomela | 10Hz ho 55Hz 1.5mm DA | |
| Boima ba yuniti | Hoo e ka bang.110g | |
| Kaho | Mofuta oa Sekoahelo sa Lerōle | |
Lintlha: 1) Lintlha tse bontšitsoeng ka holimo ke litekanyetso tsa pele.
2) Ka kopo fumana mocheso oa mocheso oa coil ka sebopeho se kobehileng ka tlase.
| Lebitso VDC | Nka Palo ea li-volts (Bok.) VDC | O tlohetse Palo ea li-volts (Mits.) VDC | *Boholo. E lumelletsoe VDC | Koele Khanyetso Ω± 10% |
| 12 | 9.00 | 1.2 | 13.2 | 71.8 |
| 24 | 18.0 | 2.4 | 26.4 | 288 |
| 1 10 | 82.5 | 1 1 | 121 | 6044 |
| 220 | 165.0 | 22 | 242 | 24444 |
| Lebitso VAC | Nka Palo ea li-volts (Bok.) VAC | O tlohetse Palo ea li-volts (Mits.) VAC | *Boholo. E lumelletsoe VAC | Koele Khanyetso Ω± 10% |
| 12 | 9.60 | 3.6 | 13.2 | 12.6 |
| 24 | 19.2 | 7.2 | 26.4 | 50.3 |
| 1 10 | 88.0 | 33 | 121 | 1069 |
| 220 | 176.0 | 66 | 242 | 4254 |
Hlokomela:
"*Max Allowable Voltage": Coil ea relay e ka mamella matla a maholo a lumellehang ka nako e khuts'oane feela
Lintlha:
1 .Boto ea PC e kopantsoeng ka mofuta oa sekoaelo sa lerōle le li-relay tsa mofuta oa flux tight e ke ke ea hlatsuoa kapa / kapa ea koaheloa.
2. Mofuta oa sekoaelo sa lerole le li-relay tsa mofuta oa flux tight li ke ke tsa sebelisoa tikolohong ka lerōle, kapa H
| Matla a Coil | DC: 2.0W AC:4VA |
| Hlahisa Litekanyo | Setšoantšo sa Wiring (Sheba ka tlase) | Sebopeho sa PCB (Sheba ka tlase) |
Tlhokomeliso: 1) Haeba ho se na mamello e bontšitsoeng ka tekanyo ea kemiso: tekanyo ea kemiso ≤ 1mm, mamello e lokela ho ba ± 0.2mm;tekanyo ea kemiso ＞1mm le ≤5mm, mamello e lokela ho ba ± 0.3mm; tekanyo ea kemiso ＞5mm, mamello e lokela ho ba ± 0.4mm.
2) Mamello ntle le ho bonts'a sebopeho sa PCB e lula e le ± 0.1mm.
